exocet® Petrol Power Restorer

Treatment Ratio
1 litre treats 200 litres

removes deposits and restores power
no maintenance downtime
direct fuel economy benefit

Cleaning
‘Clean up’ and ‘keep clean’ are at the root of the majority of our multifunctional packages for both open flame and internal combustion system enhancement. But ‘cleaning’ encompasses much more and exocet® problem solving products used in conjunction with our fuel preservation and tank cleaning products an all round fuel ‘polishing’ effect can be achieved.
Economy
Fuel economy in any system and in any equipment is largely achieved by maintaining that equipment at ‘factory settings’ or at its design parameters. Fuel additives that slow down or even stop the rate at which equipment ‘gets dirty’ or ‘fouls up’; all aid fuel economy. This may also be achieved by proper maintenance of the fuel in storage or by affecting its behaviour within the equipment.
Maintenance
exocet® fuel additive products used for maintenance are diverse, ranging for the one off rapid injector cleaning additives to fuel soluble biocides as well as tank cleaning and associated products.
Performance
‘Performance’, when attached to fuel, often conjures images of ‘faster’, ‘more powerful’ or ‘more economical’ and all of these can be achieved with the appropriate fuel additives. Fuel additives can also impact on fuel in storage, the handling properties of fuel and on the harmful effects the fuel itself can have on components within the fuel system both before and after the combustion process.

Better throttle control/driveability is required
Require compatibility with bio-components (ethanol)
Desire optimum engine cleanliness

Over time and particularly on high mileage usage, deposits build up on
inlet valves
injectors
combustion chambers
pistons tops
cylinder heads

This can lead to
rough idling
surging
poor power delivery

All of which results in poor driveability, performance and
fuel economy and an increase in unwanted emissions.
Adding Exocet® Petrol Power Restorer cleans up
the whole fuel system and performs equally well in
carburettor, port injection or direct injection engines.
It is ideally added directly into the fuel tank and results
should be seen immediately.